Hello. I am at a loss. In TIA17 i am trying to use MTP1000 Unified comfort panel.

Can't figure out why my HMI is not showing up when i simulate. I installed the panel images earlier, even though i can't see them among installed componentents.

A question mark is why i can start simulation for panel/hmi, but can't click the RT-button up next to PLC-simulation.

Cheers //

Hi DB_123,

the WinCC Unified Runtime is a web application, just open a browser and call https://localhost/WebRH (link will only work while runtime is on!).

Kind regards
Stefan

Hi DB_123,

You need to configure a user in the project, with a name and password, to access with these data and log in to your RT application (in https://localhost/WebRH).

Afterwards, you will be able to see your Start screen.

Maybe this manual is helpful if you haven't worked with a Unified system before:

SIMATIC HMI WinCC Unified Getting Started V17

The documentation worked! Thanks!

Ps. Just had to remember NOT to keep online user admin data... Ds.

Ps. Watch out for changing computer name. This will mess things up when moving from https;//localhost to https://computername/WebRH

If you do change the name, then you need to start wincc unified configuration and update according to new computername for runtime to work. Also might be that you need to write https://computername/WebRH directly for it to work.

Ds.