828D: when USB is connected, the message appears: "Access to drive not possible".
Created by: Mohanack at: 6/26/2023 3:30 AM (9 Replies)
Rating 
Thanks 1
10 Entries
| 6/26/2023 3:30 AM | |
Joined: 5/24/2018 Last visit: 11/29/2025 Posts: 15 Rating:
|
Hi piscean, How are you sir? After a long time iam chatting with u...then i also facing same problem. My controller is 828D, i connect USB in front "access to drive not possible " msg coming....what i need to do? Please do favor for me??? ------------------------------------------------------------------------------------------ |
Last edited by: Mohanack at: 06/26/2023 03:31:25Last edited by: Jen_Moderator at: 07/20/2023 04:29:36New subject after splitting |
|
| 6/26/2023 10:48 AM | |
Joined: 4/28/2015 Last visit: 1/20/2026 Posts: 387 Rating:
|
Hi Mohanack, What format and size is the usb stick you're trying to use? Hope this helps Luke |
| 7/3/2023 4:32 PM | |
|
Joined: 5/24/2018 Last visit: 11/29/2025 Posts: 15 Rating:
|
Hi, Thanq for ur reply. Yes,i checked it is in front only.... |
| 7/3/2023 4:34 PM | |
|
Joined: 5/24/2018 Last visit: 11/29/2025 Posts: 15 Rating:
|
Hi luke, Thanks for your support. Pen Drive size: 8gb and format is NTFS |
| 7/10/2023 3:24 AM | |
|
Joined: 5/24/2018 Last visit: 11/29/2025 Posts: 15 Rating:
|
Thank you luke. I will try and inform you |
| 7/19/2023 4:56 PM | |
|
Joined: 4/28/2015 Last visit: 1/20/2026 Posts: 387 Rating:
|
Hi Mohanack Glad you now have access, NTFS is unlikely to be recognised by the 828Ds Linux subsystem Luke |
Follow us on