Hi @bg2492,

Im facing the same issue as A9K. Im very bad at writing C-script. Could you please guide me how to write the complete RPTJobPrint at specific time/hour? Thank you in advance! 

bg2492

Hello A9K,

you can configure in the WinCC Report Designer a Layout with
the dynamic object Hardcopy.
This makes a hardcopy of the whole screen or parts of the screen,
if you this configure.
Then you can configure a printjob for this Layout.
Here can you define the printing to a *.emf- or *.pdf-File.
For printing the printjob you can configure a Global Action
in the C-Editor, which you trigger every 1 hour.
The check in the script, if it is  7 AM , 3PM or 11 PM.
If yes, print the printjob by using the standard-function
"RPTJobPrint".

{
//Print the specified print job out
RPTJobPrint("@Text library (compact)");
}


Parameters of the RPTJobPrint function:
@Text library (compact) is the name of the print job.



Regards

Georg Berghof

 

------------------------------------------------------------------------------------------
Split from WinCC Runtime Screen shot on trigger..