Hi, 

Logo module  6ED1052-1CC08-0BA2  firmware   1.84.03

LogoSoftComfort V8.4.1

After i type in the IP adress of Logo Base module in a brower, the url changes into 

192.168.1.47/logo_variable_01.shtm  and i get   not found  on this page, and i do not know why.

I have the same problem on another identical logo.

I loaded also an LWE project on the SD card. Access to the customised site is OK 

On Logo BM online settings

 LSC and LWE Access Password is enabled

 Webserver access HTTP is enabled

 Web user is enabled

 TDE access enabled (Some issue with this option diabled)

I used an 4GB SD card formated in Fat32

Can anyone point me into the wright direction to solve the webserver access towards logo BM

Best regards,

Fabrizio