"Hello everyone. I work with TIA Portal V18 and WinCC Basic 16. I compiled and got the following error:

I have searched in the forum and the manuals, but there is no information."

Murof

Hello AutoGen_1653789

you do not work with the latestest Version so do you use the latest Updates for your TIA Version ?

Does this error occur only with one special project or with all projecs on this system?

Do you have tried to reset the IM folder in this project:

https://support.industry.siemens.com/cs/de/en/view/109778709

Bye Murof

Hi Murof and thank you for your help.

This error occurs when we work with a large number of faceplates, buttons, screens, languages, etc., etc.
The only way we’ve found to fix the error in any project is by removing elements, especially faceplates.
We checked the WinCC requirements (in our case, WinCC Basic), but at no point do we exceed the number of elements per screen as specified.

And of course, the error that appears when compiling is the one I attached in the image at the beginning of the post.
We tried deleting the IM folder as you mentioned, but the error persists.
We contacted Siemens Support some time ago, but we still haven’t received a response.