Hi guys,

As a beginner i would really need some help with understanding a problem i have when i try to controll
https://www.distrelec.biz/en/slider-type-actuator-ball-screw-300mm-lefs-series-smc-lefs16a-300-r36p1/p/11074082
via
https://se.profibus.com/produkter/jxcp1

Via "Control_bits" block i can jog the motor in + and -, and i can also do a setup (drive it to 0 position). But when i via "jxcp1_outputs" block set a "target position" and set the "start flag" i immediately  get a fault. Any ideas?

so_luy49l

Please, can you explain more specifically? or is there any other way? Because I tried but it still doesn't work.

 Let me know if you still need help with this, i could send you the program.

Hi could you please share the program with me and maybe how you set up your fb including the example of your db

I've used this device on a Compact Logix and the “Function Block” was already configured for the drive. Does SMC or Siemens offer a preconfigured Function Block for the JXCP1 Drive and if so, could someone drop a link to the download. Thank you!