Update to V7.1 SP1

If you have already installed V6.x or V7.x of the PCS 7 software running under Windows XP Professional or Windows Server 2003 (Windows 2000 is no longer supported as of PCS 7 V7.0), use the update function (refer to the "Setup Type: Install/Update" dialog box).

Installation

There are two possible ways to install PCS 7:

· Install a previously-saved image of the operating system (PCS 7 must not be installed in this image). You can then install PCS 7 on this image.

· Install the operating system, and then install PCS 7.

You can find detailed information about the installation requirements and procedure in the "PCS 7 - PC Configuration and Authorizations.pdf" document located in the "_Manuals\English" folder on the SIMATIC PCS 7 DVD.