SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

auto fault acknowledgement

6/2/2011 2:10 PM	Rate (0)
ercanbozi Posts: 71 Rating: (0)	Hi; Anybody knows that what is the parameter of auto fault acknowledgement in Micromaster Best Regards;
ercanbozi Posts: 71 Rating: (0)
Suggestion To thank Quote Answer

6/2/2011 2:29 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, You could assign one of DI of MM. to be for "Fault acknowledge". For example P0701=9, means the first digital inputs. And to connect there 24V DC continuously. if you had fault after disappering of the reasons for that will be ack. automatically. It is a not so "gentle way". There is an options Automatic Restart Automatic restart Configures automatic restart function. 0 Disabled 1 Trip reset after power on 2 Restart after mains blackout 3 Restart after mains brownout or fault 4 Restart after mains brownout 5 Restart after mains blackout and fault 6 Restart after mains brown/blackout or fault Finally clarify why do you need this and how is controlling the MM. Perhaps exist another better way... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

6/2/2011 3:52 PM	Rate (0)
ercanbozi Posts: 71 Rating: (0)	I need, because sometimes my MM produces some faults and process stops. Until I go to the beside of my MM, the fault has disappeared. So I lose the time and production stops. I'd like to obstruct the this situation. To summarize when a fault occures for a moment, or temporary ıt must be reset by the drive.Can I solve the problem with only the help of parameter or its needed to wire some inputs thnks
ercanbozi Posts: 71 Rating: (0)
Suggestion To thank Quote Answer

6/2/2011 7:26 PM	Rate (0)
Vithani Platinum Expert Joined: 7/8/2009 Last visit: 6/7/2025 Posts: 1977 Rating: (479)	Normally it is not recommended to use auto acknowledge because if your drive is tripped then you should check and rectify the reason.. But if you really want to do that, then you can use automatic restart as suggested by UMENCHO.. you can set No of attemps to start after trip.. To use this function, you need not any hard wire Regards Devesh
	I dont Like people driving Fast, thats the reason I overtake them ;)
Suggestion To thank Quote Answer

6/2/2011 9:34 PM	Rate (0)
Out Control Posts: 204 Rating: (1)	Hi recanbozi, you can see parameter P1210 automatic restart in operating instructure manual. Best regards Nashwa
Out Control Posts: 204 Rating: (1)
Suggestion To thank Quote Answer

Share this page:

Share this page on...