Hi,

Whenever I work on Siemens HMI.I found it,it has very low level graphics.

Is it any library with I can use for better graphics and Animation.

Discrete Alarms.

Facing problem with Discrete Alarm.HMI Alarms only accept Int Trigger Tag.How I can configure my PLC Discrete Tag?

Hi obi1987.

First, you can use a lot of Symbols from the different Libraries.
Too you can use external graphics.  

If you need plant specific alarms, you just define discrete alarms in your PLC, the same variables must be defined in HMI. Then you can use the properties of the variable to define alarming, alarmgroup etc.

 Regards JRB28

Hi JRB28,

From where I can download the graphics library.

Hi,

Some libraries should come with Winccflex. You can find them in the "toolbox" the label called "libraries". It should be in the bottom left area of the screen by default.

Hello 

It`s also possible to  create your own graphics and use them , 

regards