SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Mac address

8/22/2011 11:45 PM	Rate (0)
JohanChala Posts: 59 Rating: (0)	Good Afternoon: I need help, please, How do I find the MAC Adress of a PLC s7-200?
JohanChala Posts: 59 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mohsen_Rahmati

8/23/2011 9:12 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, A S7-200 does not have a MAC-Adr. because there is no S7-200 PLC with Ethernet Onboard! Ethernet Interface and the Mac-adress is possible with CP243-1. Here the MAc-Adress is printed on the EM housing. Mac-Adr. via MW: Open the PLC information. Select the CP and open the properties. The Mac-Adr. you can find in the TAP Adress. If the CP is connected next to the PLC, then you can check SMB200-250 for this possition and check if you can find the Mac-Address in this SM-Area for EM possition 0. Hope this helps Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mohsen_Rahmati

8/30/2011 11:56 PM	Rate (0)
JohanChala Posts: 59 Rating: (0)	Thanks so much
JohanChala Posts: 59 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mohsen_Rahmati

4/10/2015 12:56 PM	Rate (0)
Amol Jadhav Posts: 52 Rating: (1)	Hello Helmut_13 In my project 200 PLC & CP243-1 is available , but I am unable to find mac address. I try to find out mac address through Step7,but didn't get mac address. Can you help me . I already post a my exact query about that. Please have look https://support.industry.siemens.com/tf/ww/en/posts/sf-fault-on-cp-card/124475/?page=0&pageSize=10 Thanks in Advance.
Amol Jadhav Posts: 52 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mohsen_Rahmati

Share this page:

Share this page on...