Dear experts ,

One month ago I started a  project within TIA Professional v13 .

My hardware configuration was including a CPU (1513-1) , 4 analog modules and the UPS Controller UPS1600 along with the UPS Battery Module 1100 .

Meanwhile I reinstall my operating system (Win7 professional 64 bit) and recently , I bought TIA Professional v13 SP1 . I installed again the necessary HSP for the UPS components . 

However  ,when I tried to add again from the hardware catalog the UPS Battery Module 1100 , the TIA Portal v13 SP1 crashed .

I also updated TIA Portal with Upd1 and Upd 2 and I got the same result :TIA Portal crashed when I was attempting to add to hardware config. the UPS 1100 module from hardware catalog.

I opened  the old project (the one developed within TIA Porta v13) without upgrading the project(even if I would tried to upgrade the project I would get an error) and I could remove/add  the UPS battery Module 1100 to my hardware config without TIA Portal getting crashed .

So  something has changed from TIA v13 to TIA v13 SP1 which prevents me to add the mentioned UPS module , but I can't tell what .

Does anyone have any suggestion ?

Regards

Andrew

• My requests (0)

Other thought: Do you have any other software installed (Anti-virus++)

Personally I think this is going to take time to get sorted out..
I would work on PLAN B at the same time getting an original TIA13 up and running.

@Others: Is there someone that is willing to try and replicate the conditions described in the original question?

Hi,

Yes , I did that - the official request .

Probably as an alternative plan the best thing for  me is to return to Step 7 v13. 0.

Still , I can't understand ,why something that is supposed to be an improved version doesn't keep the good old features.

Regards

Andrew

Hi,

I tried to upgrade project with two Sitop UPS 1600 and it always failed.

Removing them from the project made it possible to upgrade.

Opening Sitop UPS 1600 crashes TIA portal.

Thordur.

thorduri

Hi,

I tried to upgrade project with two Sitop UPS 1600 and it always failed.

Removing them from the project made it possible to upgrade.

Opening Sitop UPS 1600 crashes TIA portal.

Thordur.

ouch!
Thanks for sharing your experience with us.
Your issue also sounds as if you should make a formal request for help from Siemens Support. Unless we have a result from aney_312.

Good luck!
w

Hi ,

I got in touch with Siemens ; they will let me know as soon as  they fix this issue or at least find a temporary 'work-around' .I'll keep you posted .

aney_312

Hi.

I downloaded GSD file from Siemens (two versions available) and installed that successfully and was able to install UPS through "Other field devices/Profinet IO/Siemens AG/UPS1600"

Best regards

Thordur

Hello,

there are new HSP for SITOP UPS1600 for TIA V13 SP1 available:

HSP for SITOP UPS1600 for integration in Step 7 V12 SP1 TIA or Step 7 V13 SP1 TIA