Dear all,

I started with my new project (PLC+HMI) last February using Tia Portal V13 Update 4 (No service pack).

I did regular Tia Portal upgrades during the work's progress and at today I arrived at V13 SP1 Update 5.

I know that one of the last update included the Popup folder in the "screen Management" but in my project it doesn't show.

So, I would like to use this new feature but it's not possible for me use it in my actual project.

I tried to create a new project and the popup feature appears.

How can I improve this new feature in my project? 

Many thanks in advance!

F.

Hi Francy73

If you use a Basic Panel you cannot use the Pup Up Screens. If you have a Comfort Panel or an advanced Runtime then do the following steps:

-> klick on the Panel in the Project Tree-> Rightclick-> Properties-> Change device/version

Look at the left sideif you haven´t V13.0.1.0 then y ou have to select the Panel again in the Hardware Catalog and select the new image V13.0.1.0

Then you can use the Popup Screens.

Hope this helps

Bye Murof

Many thanks for your quickly and useful reply!

I solved my problem!

Thanks a lot!

Francy73