Dear all,

I have a short question regarding HART AI Card (6ES7 331-7TF01-0AB0).

Is it possible to configure and connect to this card both type of  sensors: HART Enabled sensors and normal 4-20 mA sensors?

Thanks, 

Mircea.

Hi,

you can connect current sensors or transducers to the analog input modules.

Please have a look in the manual, Chapter 6.1. 4...20mA with/without HART and 0..20mA / +/-20mA (without HART usage).

https://support.industry.siemens.com/cs/de/en/view/22063748

Regards, Towome

 Hi Towome,

I can't figure out how could I missed that info.

Thanks a lot.

Towome

Hi,

 

you can connect current sensors or transducers to the analog input modules.

 

Please have a look in the manual, Chapter 6.1. 4...20mA with/without HART and 0..20mA / +/-20mA (without HART usage).

https://support.industry.siemens.com/cs/de/en/view/22063748

 

Regards, Towome