hello everybody 

who can help me please ???

i want to send message with my HMI usingTIA_PORTAL V13 (plc s7300+ tp900 pannel ) 

what are the principal steps please ?? need your help 

thank YOUUU

anayisse

hello everybody 

who can help me please ???

i want to send message with my HMI usingTIA_PORTAL V13 (plc s7300+ tp900 pannel ) 

what are the principal steps please ?? need your help 

thank YOUUU

 Hi

What mean of "send messge":

- send SMS to phone

-show message in your HMI

...

anayisse

hello everybody 

who can help me please ???

i want to send message with my HMI usingTIA_PORTAL V13 (plc s7300+ tp900 pannel ) 

what are the principal steps please ?? need your help 

thank YOUUU

 Hello anayisse,

I think first you shall have a GSM modem

For more details: Kindly find this link

hello 

i mean ! sending message to gsm ??

more help please ???

thank YOUUUU  

anayisse

hello 

i mean ! sending message to gsm ??

more help please ???

thank YOUUUU  

 Hi

With only HMI and S7300 you cannot sending message

You must need GSM module, folow the link of Ibrahim Fathy may help you

Hello anayisse;

When a solution is proposed, it is generally considered polite top at least open the offered link and see what the solution contains.

For example, Ibrahim showed you a link that contained this declaration:

The following scenarios have been realized in the application example:

• Sending SMS messages with or without coefficient to a recipient.

• Receiving SMS messages and converting them into configurable switching commands.

• Remote query of an S7 CPU value from a mobile terminal unit.

Please study the answer before requesting more help, please.

Hope this helps,

Daniel Chartier

hello ! 

the SMS_Examples can not be open ! 

beacause im using TIA_PORTAL_V13 and the examples shown are with TIA_PORTAL_V13 SP1 that's why i addes new post ! 

best regards !

Hello anayisse.

You could use an installation of V13 SP1 on a virtual machine to check out these examples.

But you have to be aware that some example projects are V13 SP1 because the used methods aren't available in older versions and some are just on the up-to-date version of the TIA Portal.