Hello,

please specify you question.

In the Screen no CU320 is shown.

How the CU320 is Connected to the D425? (PROFIBUS od PROFINET?)
Which FW you use on D425 and CU320?
Have you download the HWConfig with a active PG/PC assignment to the Simotion?

In your screen there is a Sinamics Integrated on the same level like the D425, can it be that you have transfered the Integrated device from the lifelist to the project?

Regards

Christoph

Hi,

why you never wrote what exactly you have done?
In the screen is a D425 with Sinamics_Integrated, open the context menu of the Sinamics_Integrated-> Target System -> online access, here you can see which online Information is configured for the device.

Which information is here displayed? which adress in the adress tab?

Regards

Christoph

Hello,

ok you haven't assign a PG/PC to the Simotion so is not possible to get the Adress informations for the Integrated drive which can only be reached with S7-Routing.

Open netpro, place a PG/PC in the project connect the PG/PC to the network which you use to connect the D425, then assign a PG/PC Interface to this Net in th PG/PC Network.
Save&Compile , download netpro, then the integrated can be accessed.

Regards

Christoph