Hi,

In one of our machines that has many simodrive and ET DP nodes . we had some problems with CPU317.we exchanged last CPU(6ES7317-2AJ10-0AB0) with new one(6ES7317-2AK14-0AB0).after downloading HW an software.some function block that comunicate with simodrive didnt work completely.the hw configuration has attached.

Is there any adjusment with new CPU for example network scan time or like this that we should do?

Hi,

Thank you for your answer.I have checked .the version is higher than original.that is 3.

Thanks alot

Hi,

if you mean memory card.I used old one.I had a backup on the PG and I transfered program  from PG.

Hello,

Kindly have a look at the following FAQ:

What should you watch out for when changing from one S7-300 CPU to another?

If there are multiple differences between the order numbers, for example a CPU with the order number 6ES7315-2AF03-0AB0 is to be replaced by a CPU with the order number 6ES7315-2AG10-0AB0, then under certain circumstances you should note the following additional information: This additional information is available either in the paragraphs below or also when comparing the CPU specification and CPU properties.

hello,

I havent seen additional information that  you told.please send this information that I should note.

thanks alot