hi 

if I have TIA PORTAL  can I make scada system by using it need another software ?

------------------------------------------------------------------------------------------
Split from How to configure Scada in WinCC RT Professional (TIA Portal V13)?.

Hello,

Its for everyone.

Its important to understand what is mean by TIA portal.

TIA portal is platform not software. You can not order TIA portal.

You will find different software package options under TIA portal platform 

Step 7 basic : configuration of S71200 and Basic HMl panel

Step7 professional: configuration of S71200/S7300/S71500/ET200 s controller

WinCC basic: configuration of Basic HMI panel

WinCC comfort /Advance: Configuration of Confort and higher series HMI and PC based SCADA . Its engineering package

WinCC advance Runtime : PC based SCADA runtime

WinCC Professional: configuration of SCADA like WinCC7.X

You can configure server client/ redundancy with required license. Its Engineering package

WinCC Professional Runtime: SCADA runtime .

Start drive: configuration of G120 series drive

Safety Advance: Configuration of safety PLC like S71200F/S7300F/S7400F/S71500F/ET200 F controller

Safety Basic : Configuration of safety PLC S71200F.

Once you install this packages then all will integrate together and generate common data base. So you can work on common platform of TIA portal.

If you feel this post is useful then dont forget to rate.

If I've understood Ahmed's question correctly...

You just need to check in the "Installed Sofware", what exactly has been installed.

If WinCC Runtime Adv/Prof is installed - then yes, you can use it. This is like separate runtime engine.

But there could only WinCC Runtime Adv/Prof Simulator be installed. Then you can use it rather from within TIA Protal for debug purposes