Dear All,

We are facing problem on starter when ever drive is tripping it shows some time we can not find out exact time. we do not have AOP30. we are using TDC so please provide some details for updating time on starter through TDC.

ChristophD

Hello,

the timestamps in starter based on the time information of the Connected drives.

The drive can work in UTC mode or Working Hour mode.

on the mode the tmestamps are based.

You can try to sync the time in the drive with the time of the used plc.

Which Drive type do you use?
Which Filedbus do you use?

Regards

Christoph

 we are using sinamics S120 drive with TDC controller. the communication between TDC and drive is conducted through profibus. we have more than 80 control unit so we can not provide AOP30. so please provide some details.

 Thanks for ur reply. Is this manual is suitable for TDC.

ChristophD

Hello,

check this App Example:

https://support.industry.siemens.com/cs/ww/en/view/88231134

you must program the timesync between PLC and Drive yourself.

Regards

Christoph