Hi All,

I’ve got a problem with font size on my HMI.

I have recently added new screen and after uploading my HMI all fonts have become very small.

(Only Alarms text have not changed)

I thought it was a problem with my new screen so I uploaded a backup of my HMI . Unfortunately, all fonts are still very small. Of course in my Project font size has not changed).

Any idea what can I do about this.

Running TIA V13 SSP1 UP9, HMI version 11.0.2.0

Thanks,

Tym

ChristophD

Hi,

have you cheched the Scaling Settings in you Windows?
It should be 100%.

Regards

Christoph

Hi Christoph,

well I haven’t change any settings.

Do you mean scaling settings on my panel (Windows CE)? Where do I find this settings?

Thanks!!

ChristophD

Hello,

no i mean the scaling on the Engineering Systewm where you create/modify the project.

regards

Christoph

Hi Christoph,

so I haven’t changed the scaling settings.

I was working on my new screen and I have uploaded HMI few times at this day. And at some point my font has changed.

At the moment I have 125% (Standard) and I can try today to change it to 100% or 150% and see how it influence my HMI.

Is there may be anything else I could try?

Thank you!

Hi All,

I have solved the problem.

Recently I have received a new laptop with TIA V13. I haven’t noticed that it was SP1 but without any update. So I updated my system to TIIA V13 SP1 UP9 and my problem is gone.

Hope it can help someone!

Thank you for your help ChristopD