Hello Dear all,

I have a project with KTP1000Color PN and PLC ... .

I have write some text in my HMI screen in Persion/Farsi language.

After running the HMI device and main root screen started, the texts displayed vice versa and
Broken.

My project is created in TIA v13 sp1.

May you please tell me that, what's the wrong?

Best regards

Tekabi

Hi rdoliveria,

Thanks for your reply.

My first language is English.

I can't find Persion/Farsi. how can i add it?

Best regards

Tekabi

Hello Tekabi;

Others have faced a similar problem, with Arabic, on a TP 277, with WinCC Flexible. Since Farsi uses the Arabic alphabet, maybe it could be a solution.

See Ayman Elotaifi's second pont on the second page of this discussion.

https://support.industry.siemens.com/tf/ww/en/posts/arabic-language-support-in-tp277/72878?page=1&pageSize=10

If your programming software is TIA Portal and the proposed solution does not help you, please advise.

Hope this helps,

Daniel Chartier

Tekabi

Hi rdoliveria,

Thanks for your reply.

My first language is English.

I can't find Persion/Farsi. how can i add it?

Best regards

Tekabi

Check if it is not just the size of the "textfield" that is cutting your text.

good luck.