Hay iox65 

i see how you did this now the bit i was getting incorrect was the bit int he bar grip and setting the same set points as in the function block 

i am still trying to replicate this on the KPT400 screen which i have the graph and can see it going up and down but not to scale 

im sure it will happen i have posted in another topic but no replies as yet 

Ta 

ixo65

I have a little problem with you, you naughty boy.

You always change the files. The file with the name "0 to 10_V4.lsc", which you have uploaded in the WinCC conference, is another file which I have provided to you as "0 to 10_V4.lsc". And this was not the first time.

How should I help you then?

How can I tell the other users in the WinCC conference which blocks with which settings you are using?

 I am sorry if i have uploaded something i shouldn't 

I used the one that you did as a example as its this that im trying to represent on a HMI if i need to remove it i will. 

I may have changed it slightly as i am trying different things with the example