Hi everybody!

We received a new system with preset IP addresses for the PLC and drives. Due to our Network, the IP addresses had to change. I started with the IP address for the PLC and the drive was showing a 'BF' light and A8526. Then I went ahead and changed the IP address of the drive via P8921 and 8922, activated them with P8925=2 and verified that the new address was accepted by the drive by checking r8931 and 8932 after cycling power. I also changed the address for the drive in our PLC (which is a AB Compact Logix). The drive doesn't show the 'BF' fault anymore but the A8526 is still present. The drive shows up like nothing is wrong in the PLC program tree. Did I miss anything? I also verified the Subnet Mask and it shows the correct one.

Thank you in advance for your help