Hello All,

I have a machine which is old and revised to 840Dİ control. Machine was working until now. In these days there is some problem on positioning, and i disabled the linear encoders. There was no problem maybe for 5 days.

Then this error occurring on screen suddenly and uncertain times. When i restart the machine this error disappear and it comes again a little bit times later.

I am waiting your suggestions.

Hi

Please see section 1.1.7 “Power Failure” in the attached manual (link below)

https://support.industry.siemens.com/cs/attachments/109253689/HBIsl_0306_en.pdf

Hope this helps

Luke

...sent from App