Dear all,

How to establish communication of S7 1200 with VFD (micromaster or sinamic) using PROFIBUS without TIA Portal start drive using TIA portal V15.

Hello,

if you have a preconfigured VFD and know the telegram then you must only insert the GSD in the project, configure the Telegram in the GSD Slave and this is it.

If you need to configure the VFD then you must use the Tool STARTER.

Regards

Christoph

Hello,

her you find examples:

https://support.industry.siemens.com/cs/ww/en/view/70155469

Regards

Christoph

Hello,

the basics are the same.

the main difference is only that you use not the startdrive catalog folder (Drives).

you use the object from the additional devices .

That's all.

Regards

Christoph