Hello,

We have a computer which contain these software :

Step7 V5.5 SP4

Simatic Wicc flexible 2008 SP3

The computer starts to get old and the seller offered us a computer with these part number :

6ES7810-5CC12-0YA5

6AV2102-4AA05-0AE5

I've searched and found that it is about

SIMATIC S7 STEP 7 Prof 2017SR1/V15.1 and SIMATIC WinCC Advanced V15.1

Can these softwares recplace the ones we have (compatible with our CPU and open the v5.5 programms) ?

Our CPU is : SIMATIC S7-300 CPU 315-2 PN/DP (6ES7315-2EH14-0AB0).

Thanks.

Hello,

this products are TIA and not direct compatible with the old Step7 you use.

Withe the 6ES7810-5CC12-0YA5 you can install and use the actual Step7 V5.6 Sp1 which can use your old V5.4 project.

You can also migrate the complete Step7 V5.x/WinCCflex 2008 project to tia Portal here you must lock which HMI you use.

In V15.1 only the basic and comfort panels serie supported no older one from Winccflex.

Regards

Christoph

Thanks

As i don't want to use TIA and don't have HMI, i'd like to keep the actual softwares (which works with my CPU).

What are the part numbers of :

STEP 7 V5.5 SP4 and SIMATIC WinCC flexible 2008 SP5

in oder to suggest them to the seller ?

Hello,

step7 V5.5 is out of support!

Step7 V5.6

WinCC flexible 2008 SP5 

in the product release you find the Orderlist for the product.

regards

christoph