Program 3 automatics valves using indirects address
Created by: Gregório at: 7/10/2019 2:14 PM (2 Replies)
Rating 
Thanks 0
3 Entries
| 7/10/2019 2:14 PM | |
Joined: 2/28/2018 Last visit: 5/19/2025 Posts: 24 Rating:
|
Hi all! I would like to program 3 automatics valves using indirects address with the same functions but in the diferent steps(dinamicly). So, I created a UDT10 with all data of the valves, that is being called in a DB10 ! But I want to program the actions of the valves in only FC for calling all the datas performed into DB10. How can I do that easely ! Please help me, I want to short my project. Greggy_k ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/11/2019 06:58:25New subject after splitting Greggy_k |
|
| 7/11/2019 8:59 AM | |
Joined: 9/23/2005 Last visit: 1/14/2026 Posts: 5155 Rating:
|
OT, I've never herd that something can be called out of a DB. Pass the UDT as IN/OUT of the UDT10 type.
|
|
Regards, |
|
| 7/11/2019 2:00 PM | |
|
Joined: 2/28/2018 Last visit: 5/19/2025 Posts: 24 Rating:
|
Thanks ! |
|
Greggy_k |
|
Follow us on