Dear Expert,

I would like use Comfort panel TP1200 connect it but I don't know can it connect to cu320 while it connect to other PLC.

How can I connect HMI Comfort Panel direct CU320 Sinamics S120 drive via Profibus DP while CU320 connect to third part PLC via profibus simultaneously ?

Best Regards,

Vorapob

Hello vorapob;

Based on the description of your situation, you should have no problem connecting your CU 320 to an operator panel as well as other Profibus-DP nodes. Profibus-DP is designed to work that way.

If you give us more information on the problems you are encountering, such as the Profibus nodes on the bus and the error messages you receive, we could probably give you more specific information.

Hope this helps,

Daniel Chartier

dchartier

Hello vorapob;

Based on the description of your situation, you should have no problem connecting your CU 320 to an operator panel as well as other Profibus-DP nodes. Profibus-DP is designed to work that way.

If you give us more information on the problems you are encountering, such as the Profibus nodes on the bus and the error messages you receive, we could probably give you more specific information.

Hope this helps,

Daniel Chartier

 Dear Daniel Chartier,

I just first time to do that.

I am trying to search manual to do that. I have machine with third part PLC which connect to CU320 via profibus and I will connect new comfort panel on CU320 as well in order to record any parameter on OPC UA client software.

Do you have any manual or VDO step by step to connect comfort panel with CU320 via profibus DP ?

Best Regards,

Vorapob

ChristophD

hello,

here the faq for hmi direct access to SINAMICS

https://support.industry.siemens.com/cs/ww/en/view/97550333

regards
Christoph

 Dear Christoph,

As fag for hmi direct access to SINAMICS.

These example project connect HMI direct CU320 without PLC.

But, for me I have third part PLC and I need to connect HMI TP1200 comfort to CU320.

How can I connect profibus connector between CU320 and HMI.

How can I setting profibus address at HMI for this communication ?

Best Regards,

Vorapob