Dear Experts

I have sinamics G120 with control unit CU240E-2DP(6SL3244-0BB12-1PA1) and i commissioning it with vector control mode (P1300 = 22) but i dont know why , when i connect analog input (T 3/4)(V=0-10) inverter dosen't have any reaction at out put frequency or output voltage

My parameter:

p1300=22

p1000=2 or p1500=2

Please help me

Hi,

did you check the Analog input value in online mode?

check in the mask (see my screen)

Dear RB91

thank you for fast reply

I don't access to any software 

I'm in a very bad situation 

Hi,

you can download and use Startdrive for free here:

https://support.industry.siemens.com/cs/ww/en/view/109760845

Do you really want to have torque controlled mode and not speed controlled?

See p1300 = 22 is torque control

So if you would assign p1070 to the  analoge Input it wouldn't Help for a torque controlled mode.

Dear zako

Thanks for reply

I activate  p1000=2 and p1500=2 too , but no one dosen't work

Which parameter should be activate for analog input (V=0-10) in torque mode ?