Hi

I wish have an advice on below topic: 

I have programmed HMI,TP700 Comfort(6AV2 124-0GC01-0AX0 Version 13.0.1.0) and Upgraded PLC program of S7300 PN DP.The 3 HMI are running same program only the profibus node address is different.

I recently got a call from site( it is an oil rig now in Saudi Arabia offshore for drilling) that some of the texts on HMI screen got typographical errors and Buzzer on the PLC panel is not giving alarm on some of the faults.

In this occasion, I need to correct the HMI program texts on the screen and also connect some of the alarm NO contact to P_Trig and buzzer.I have updated the PLC program in Simatic Manager 5.5+ SP4 and HMI program in TIA Portal V13.1 UPD9.

Now my I need an advice for How to download this program to remote S7 300 PLC and TP700 Comfort HMI.Since the rig is in offshore, its difficult to go on board.The system is very critical for on board drilling safety hence this need to be updated.

Unlike of other new Comfort panel, This HMI control panel service and commission section does not have Load project option to load a user-defined memory card HMI program.But the same tab got Back up and then restore options which does not show the user-defined memory card file hmi Program.

How can it possible to load the updated HMI project by rig electrician if he dont have a PG with Tia portal?I have best option to send program by email? How to put password for HMI program? Is it possible to get the Load project option on the HMI service and commissioning section if its OS updated and that can do without TIA Portal? How does the electrician transfer the licenses to a pendrive while update the OS because TP Comfort panel not have Automation licence manager application in it? Can I do something with teamviewer?

Please advice, many of them looking forward for a prompt action on this subject.

Thanks in advance.

Thanks. I have download one.

My programs are in Tia Portal V13. 1.

I have  a copy of automation tool 13.0.1.

I have followed the steps to make the program. Hmi file by dragging and droping it to a user defined memory card folder but it don't make memory card file in tia portal v13. 1.

I have migrated the project to tia v15. 1 made memory card file by drag drop project folder.But when I try to open this file to download one another hmi I have at one other project site as a trial, it shows version compatibility issues. 

Is it possible to download program made in Tia 15. 1 via automation tool v13. 0.1?

Wizard

 

JKV JAMES

Is it possible to download program made in Tia 15. 1 via automation tool v13. 0.1?

 Hello,

Yes this is possible. What errors do you have?

Best regards,

Wizard

 Thanks for support.I left the Country for renew my on arrival visa. if I have an HMI in Dubai or when I return to BAHRAIN soon  or when I contact above mentioned rig , I surely check and let you with screenshot. THANKS.