hello,

I have a question,

I would like to set particular analog output value at particular time,

for example

after 5 seconds i need to open valve at 5%

30 seconds i need to open valve at 10%

90 seconds i need to open valve at 30%

..etc....

can you please tell me which block I should use ?

Leszek Jaszczak

hello,

I have a question,

I would like to set particular analog output value at particular time,

for example

after 5 seconds i need to open valve at 5%

30 seconds i need to open valve at 10%

90 seconds i need to open valve at 30%

..etc....

can you please tell me which block I should use ?

 Hi Leszk !

This Link may be helpful for you.

Please read carefully and implement program.

Br,

AmolG.

 hello AmolG

i know hot to do scaling

my problem is what kind of block i should use to set up particular analog output value

AmolG

 

Leszek Jaszczak

hello,

I have a question,

I would like to set particular analog output value at particular time,

for example

after 5 seconds i need to open valve at 5%

30 seconds i need to open valve at 10%

90 seconds i need to open valve at 30%

..etc....

can you please tell me which block I should use ?

 Hi Leszk !

This Link may be helpful for you.

Please read carefully and implement program.

Br,

AmolG.

Hello,

you can use the on delay timers to attach your given values to your output at a given times.

see the attachment below.

 hello OpisOm

your post was very helpfull for me, i was looking for "move block"

hoever your program is not working well it makes firts timer working in loop, i changed it 

thank you

OpisOm

Hello,

you can use the on delay timers to attach your given values to your output at a given times.

see the attachment below.