Hello,

https://support.industry.siemens.com/cs/ww/en/view/109751779

Bulk filling:
A "backup" of  existing devices cannot be used as "Restore" on devices with new article number  or vice versa (see Engineering). This applies  to manual as well as automatic backup with SIMATIC HMI Memory Card.

Can I backup 6AV2124-0QC02-0AX0 => Restore  6AV2124-0QC02-0AX1 (from backup 6AV2124-0QC02-0AX0) ?

------------------------------------------------------------------------------------------
Split from TP1500 Panel version compatibility (0XA0 -> 0XA1).

kphcm11

Hello,

https://support.industry.siemens.com/cs/ww/en/view/109751779

Bulk filling:
A "backup" of  existing devices cannot be used as "Restore" on devices with new article number  or vice versa (see Engineering). This applies  to manual as well as automatic backup with SIMATIC HMI Memory Card.

Can I backup 6AV2124-0QC02-0AX0 => Restore  6AV2124-0QC02-0AX1 (from backup 6AV2124-0QC02-0AX0) ?

------------------------------------------------------------------------------------------
Split from TP1500 Panel version compatibility (0XA0 -> 0XA1).

 Hello kphcm11,

I am not sure but i think that it does not work because of the article name which could be caused a hardware error. But if you have a chance to try "back up" and "restore", please inform and illuminate us.

Hi,

you give you the answer yourself.

Restore not possible.

You must have the ES Project and change the device Type an make a download.

Regards

Christoph