El Husillo principal (Spindle) no se ponía en marcha depués de por error cambiar parámetros.

Desesperado arranque el control y entré en el Set y de todas las opciones, conseguí que funcionara haciendo un "Reload Saved User Data"

El problema es que ahora hay botones que no funcionan... y el principal problema es que la carrera en X se ha acortado y la herramienta no llega al eje del Spindle.

Necesito solucionar esta alarma urgentemente...010621 "Channel 1 X/X rests on software limit switch"

Saludos.

Hello RicardoGS,

at first welcome to the forum.

This is a English speaking forum. Please be so kind and write your next posts in English.
Thanks.

RicardoGS

The Main Spindle (Spindle) did not start after mistakenly changing parameters.

Desperate I started the control and I entered the Set and of all the options, I got it to work by doing a "Reload Saved User Data"

The problem is that there are now buttons that don't work ... and the main problem is that the X stroke has been shortened and the tool doesn't reach the axis of the Spindle.

I urgently need to fix this alarm ... 010621 "Channel 1 X / X rests on software limit switch"

Regards.