ixo65

Power supply LOGO! Power

Input: AC 85 to 264 V or DC 110 to 300 V.

Ouput: 5 V / 3 A DC

Order number: 6EP1311-1SH03

Thank you! Looks I will have to buy one of those to power my sensors.

Unfortunately, my city is under lockdown (total curfew) for the next 10 days so, so I will have to wait.

One final questions,

Can the 10 volt power supply also output a 5 volt? I have few 5 volt sensors and few 10 volt sensors. Nothing more than that.

ixo65

 

Nitish_Patil

One final questions,

Can the 10 volt power supply also output a 5 volt? I have few 5 volt sensors and few 10 volt sensors. Nothing more than that.

Which 10V power supply are you talking about?

I suggested a 5 VDC power supply, not a 10 VDC power supply.

And there is no 10V power supply in the photo of you.

 

Oh, my bad.

I did not check the product line up properly.

I think my question should have been,

If I buy the 12v power supply, can I power on my 5v sensors with it? Means, can I adjust the output voltage of the 12v LOGO! power supply and bring it down to 5v?

Just wondering. Sorry for the shitty questions.

ixo65

No, that is not possible. 

Okay, thank you for all your help ixo65.

I am watching YouTube videos of LOGO PLCs as I write this message. Hopefully I will be an expert soon.

Thank you!