Navigation
Why cannot insert the HMI station in Step7?
Created by: anhnguyen0935885177 at: 7/24/2020 4:07 AM (3 Replies)
Rating 
Thanks 0
4 Entries
| 7/24/2020 4:07 AM | |
|
Posts: 5 Rating:
|
Why in Step7, I cannot insert the HMI station ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/24/2020 06:33:42New subject after splitting |
|
| 7/24/2020 4:09 AM | |
|
Posts: 5 Rating:
|
link has been deleted |
| 7/24/2020 5:16 AM | |
Joined: 12/18/2014 Last visit: 1/20/2026 Posts: 36484 Rating:
|
In this topic are different links. Which link mean you? |
| 7/26/2020 1:47 PM | |
Joined: 4/28/2015 Last visit: 11/27/2025 Posts: 10970 Rating:
|
Hello,
in case of Step7 v5.x panels are configured with other SWs - ProTool, WinCC Flexible and also you can use TIA portal without problems. |
|
With best regards... |
|
Follow us on