When i try to do "partial load" from SCL editor, i get error 294:6 - says that my block FC500 couldn't be copied. I trie other FC numbers too, like 510, 600. But same problem. 

The strange thing is, when i compile partially from the scl editor and then download from CFC editor, i see that the my SCL program has been downloaded to the CPU and running as i programmed. But why can't i download from the scl editor? But i can go online in SCL editor and see the actual values.

I am using PCS7 V9.0 SP1

CPU: 410-5HX08-0AB0

Hi Ashadako,

This behavior is correct.

It's not allowed any more to download blocks directly into the AS.
This should always go via the CFC compiler.

This was possible before the AS410 but also not the recommended way.
Now this is restricted and prevented by the CPU it self.

The download button in SCL editor is still available since this editor is not specific for PCS 7 projects.

With best regards,
Cedric