Guest

how can iCommunicate between S7-300 CPU and Unisab Controller?!

Got a PM with a request for the GSD files and the example files for S7-300.

It's a quite large package, roughly 40-50MB.

If anyone like to have the files, a drop box or similar is needed.

As I now and then are asked to send the Sabroe GSD files for the Unisab II controller and examples. GSD files attached as a start.

Unfortunately are the examples to large to upload here. They are made in Step 7 classic.

Documentation examples attached

Program examples attached.

Do not ask me about the examples, they are not mine, I got them from York.

Hi Bryll,

Thanks for posting the sample code for the communication, my doubt was I have Unisab II controller with firmware 1.13, Can i use the same code for communication on profibus.

My 2nd question was,

in the sample code do we need to send the Read/write command for FB1 Write value & FB2 Read value block everytime while reading or writing the values, I get little bit confused on how it works.

Thanks

Regards

Irfan

Hello,

Can you please share files for Unisab III.

Share files with wetransfer.com

 Hello,

Akson

Good morning colleagues,

despite repeated requests to the JC to provide GSD files to UNISAB III, I did not receive them. The question is whether any of you have GSD 095D and / or 08AA files. Thank you in advance. Regards

 ZIP file from Bryll's post in this Topic isn't ok for you?

Akson

Hello, thanks for your interest in my question. if you write about "Unisab II GSD Files.zip", I don't know if GSD files for Unisab II and Unisab III are the same, do you have such knowledge?

You can use the Unisab II GSD file for the Unisab III controller; I have already verified this.

Additionally, I am attaching the tested Unisab III GSD file if you need it.