Skip to Content

support.automation.siemens.com | Technical Forum | Monday, September 15, 2025 6:50:19 PM

Print

LOGO - Error with clock

Created by: Fueguinhio at: 5/21/2024 1:03 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

5/21/2024 1:03 PM	Rate (0)
Fueguinhio Joined: 3/23/2023 Last visit: 9/15/2025 Posts: 12 Rating: (0)	Hi everyone! I have some LOGO equipment (6ED1052-1FB08-0BA1, FW: V1.83.02), which I load with a program, and when power failure, the time isn't saved. I wanted to know if it's possible that the capacitor is damaged from the factory. Thanks in advance. Fueguinhio.

Suggestion To thank Quote Answer

5/21/2024 1:08 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35964 Rating: (4502)	The users here in the forum can't answer that. Create a Support Request and ask Siemens directly.

Suggestion To thank Quote Answer

5/21/2024 1:48 PM	Rate (0)
Fueguinhio Joined: 3/23/2023 Last visit: 9/15/2025 Posts: 12 Rating: (0)	Hi Ixo65, Thanks for your answer. I understand, meanwhile, I made that inquiry through the hotline. Similarly, it's possible that my question was misunderstood, as I actually wanted to know if anyone else experienced the same issue and if they were able to resolve it. Best Regards, Fueguinhio

Suggestion To thank Quote Answer

5/21/2024 2:03 PM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35964 Rating: (4502)	I personally am not aware of the problem. I have a LOGO! 8.3 with the original firmware V1.83.01, but upgraded to V1.83.02. All I know is that the LOGO! has to be connected to the supply voltage for a while before the GoldCap is fully charged.

Suggestion To thank Quote Answer