support.automation.siemens.com | Technical Forum | Sunday, September 14, 2025 6:58:57 PM
Rating 
Thanks 4
| 7/2/2013 4:01 PM | |
Joined: 10/31/2011 Last visit: 4/8/2025 Posts: 400 Rating:
|
Dear all, Can i upload and download program from op73 by using cp5611 without using external supply. Regards
|
| 7/2/2013 5:12 PM | |
Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating:
|
Hi daad, What do you mean with without external supply? For OP? |
| 7/2/2013 5:16 PM | |
|
Joined: 10/31/2011 Last visit: 4/8/2025 Posts: 400 Rating:
|
Dear Ste, As mension above we have to apply supply at specified pins of CP port to power up
|
| 7/2/2013 5:31 PM | |
|
Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating:
|
Hi daad, The CP 5611 must be installed into the PCI slot of the PC you do not need power. |
| 7/2/2013 5:50 PM | |
|
Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating:
|
Hi AMAZINGAHMED, As far as I know he is given the power from the PCI slot of the computer |
| 7/2/2013 8:07 PM | |
Joined: 5/28/2008 Last visit: 9/3/2025 Posts: 4522 Rating:
|
Hello, Here's the technical specification ofCP5611. The Power of it is 5VDC from backplane (PCI). Hope this helps
|
|
Ayman Elotaify |
|
This contribution was helpful to
|
|
| 7/2/2013 9:59 PM | |
Joined: 8/27/2006 Last visit: 10/22/2024 Posts: 719 Rating:
|
Thanks for the info, but why do I need 5v? what it can be used for?
|
|
The more you know, The more you know that you don't know |
|
| 7/2/2013 10:25 PM | |
|
Joined: 10/31/2011 Last visit: 4/8/2025 Posts: 400 Rating:
|
But what about 24v supply? |
| 7/3/2013 7:23 AM | |
Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating:
|
Depending on the present signal, the slot determines whether the expansion board had been inserted or not. After the expansion board is inserted, 2 pins namely PRSNT1# and PRSNT#2 determine how much peak power the PCI card is going to need... |
