Hello,

scale/unscale must be implemented by yourself.

The crossreference can be created :

Right click on PLC -> Display Reference Data -> cross reference

in the output you can filter the symbol from the adress list and you get the information where the symbol is used.

Regards

Christoph

Hello,

the max value depends on which sensor you use , which resolution the sensor use .

if you create a LAD/FBD Program you can select if you will create a Progem, Function or Functionblock.

In ST you can use Program/END_Program, Function/END_Function, Function_block/End_Function_Block for this.

Regards

Christoph

Hello,

But you never say which module you use with the Adress 274 only that is should be a 0-10V .

is not clear what exactly hw is connected to this adress.

It can be value from the drive which is scaled with the a nominal parameter in the drive, it can be a 0-10V sensor in a analog module...

So you should give a better infromation to you questions to get a valuable help.

Regards

Christoph

Hello,

you can use the SIMOTION EasyBasic library SEB LBasic_AnalogIO for that.

This library is on the SIMOTION Utilities & Applications CD which can be downloaded here:

https://support.industry.siemens.com/cs/ww/en/view/26340545

i attach the manual for the AnalogIO .

Regards

Christoph

vorapob

 

ChristophD

Hello,

the max value depends on which sensor you use , which resolution the sensor use .

if you create a LAD/FBD Program you can select if you will create a Progem, Function or Functionblock.

In ST you can use Program/END_Program, Function/END_Function, Function_block/End_Function_Block for this.

Regards

Christoph

 Dear ChristophD,

Can I only create FC or FB from ST program ?

Can I make it from LAD program ?

Best Regards,

Vorapob

 you can create FB FC Program from LAD and from ST, both is possible.

The difference is that if you use LAD you must this specify when you create the LAD Program, in the Create dialog you select what you whant to create , a Program, a Function or a Function Block.

Regards

Christoph

better for what?

If you use the Sacling  from the library the it is a FB which you can use, if you write a sclaing by yourself i would preffer the FB for it.

Regards

Christoph