Rating 
Thanks 0
| 9/15/2021 9:05 AM | |
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
Hello again is it possible to simulate HMI kp400 from your project on PC without HMI. i have tried to set ip to pc in connection but it does not work ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 09/15/2021 12:12:37New subject after splitting |
|
| 9/15/2021 9:22 AM | |
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
Yes, it's possible. I have no KP400 and so I can test the HMI program only in simulation but with a real LOGO!. |
| 9/15/2021 10:09 AM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
No. I have test it with a 0BA8 of the first generation (FW V1.08.01). |
| 9/15/2021 10:10 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
my ip address on hmi i put as my pc 192.168.0.99 on my logo is ip 192.168.0.2 |
| 9/15/2021 10:11 AM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
This IP addresses are okay, both devices are in the same subnet. |
| 9/15/2021 10:16 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
|
| 9/15/2021 10:17 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
yes they are in the same subnet |
| 9/15/2021 10:24 AM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
I mean the connection entry in the HMI (see attachment). |
| 9/15/2021 10:33 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
yes I have tried |
| 9/15/2021 10:47 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
Attachmentph_spa.zip (385 Downloads) |
| 9/15/2021 10:51 AM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
The ap15.1 file is not the complete TIA project. I need the complete project. |
| 9/15/2021 10:57 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
sorry now it should be there
Attachmentph_spa.zip (400 Downloads) |
| 9/15/2021 11:00 AM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
Now you send only a ap.13 file. The ap files alone are not a complete TIA-Projekt. |
| 9/15/2021 11:06 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
Attachmentph_spa.zip (393 Downloads) |
| 9/15/2021 11:08 AM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
I hope this works otherwise there is something I misunderstand |
| 9/15/2021 12:35 PM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
With the TIA project and the LOGO! program that you uploaded at last is a by me a simulation without problems possible. See attached screen video. AttachmentSimulation KP400 with LOGO! 0BA8.Standard.zip (369 Downloads) |
| 9/15/2021 12:43 PM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
i can not make it work. maybe I should buy a new logo and try. |
| 9/15/2021 12:47 PM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
I have tried to factory set my logo but I can not. should I not be able to? it says logo is not supported |
| 9/15/2021 12:52 PM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
maybe it's some setup on my pc that prevents it from working |
| 9/15/2021 1:00 PM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
|
Last edited by: perhvid at: 09/15/2021 13:09:32 |
|
| 9/15/2021 1:08 PM | |
|
Joined: 5/25/2020 Last visit: 3/19/2025 Posts: 32 Rating:
|
Attachmentpoolstyring 2.zip (336 Downloads) |
| 9/15/2021 2:13 PM | |
|
Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating:
|
I tested your HMI project, also no problem to simulate. Then make some optical changes. You can see the result in attached screen video. Good luck ... AttachmentSimulation KTP400 with LOGO! 0BA8.Standard.zip (455 Downloads) |
Follow us on