I'm curious how far you got with this.Did you manage to log in with a euchner RFID without a script?

_____________

split from Possible to use RFID readerconnected to PLC and change user from script in TIA V18

 to keep it simple, I have a username in a datablock, and that changes based on RFID chips.With this I want to do a user change in the HMI screen.I use V19 but I run into the limitation that I can not provide a user or password, even with a javascript it does not work (yet).Do you have any recommendations or tips?

Murof

 

StanHollander

I'm curious how far you got with this.Did you manage to log in with a euchner RFID without a script?

 Hello StanHollander

now in v20 there are additional functionalities like ChangeUser systemfunction or the login with Alias

what is your usecase and which Version do you use?

bye Murof

When I simulate my WINCC unified panel with: https://ap-l1787.hollander.local/WebRH, i get an error. It doesn't work on my laptop, but on the other laptops it does. I suspect that there is a setting somewhere that is not set correctly? Does anyone know what the problem could be,

TIAV19 update 3. Unified comfort 2200.

I need to get into the screen settings to set the user management alias for users.

--------------------------------------------------------------------------------------------------------- 

I go to: https://AP-l1787 to reach the settings of my panel.

Then to User Managment: 

Login with the admin group of my HMI:

Then get the following error:

This page is currently not working. 

If the problem persists, contact the site owner. HTTP ERROR 401. 

​