Hello everybody

I´m creating a standard unified project, using MTP700 while testing my functions.

Currently I´m wokring with alarms and I´m trying to scheduled tasks to set an internal bool which works ok, but I´m experiencing problems when using more than one trigger i.e. incoming or incomming/outgoing exc. Because of that problem I split it into three seperate tasks all with the same script in event and incomming works fine, incomming/outgoing also works fine but incomming/acknowledge/outgoing doesn´t work.

Has anyone experienced anything simelar and has any solution or should I make a ticket?

Hi,

i did not experience anything like that. I would have thought that all three Triggers in one Task would work aswell. So opening a ticket might be the best.

I would love to get an update, as soon as you get an answer :)

Best regards

Hello Stefan,

I am having the same issue. Did you ever figure this out?

Kyle

Hello Stefan,

Thank you for your offer to assist me. 

The following is in related to simulation only, I do not yet have the hardware to make a proper test.

What I am trying to achieve is very basic:

1. setting a bit when an alarm is incoming
2. resetting a bit when an alarm is acknowledged

This is for an alarm buzzer.

For this I am using the Scheduled Tasks > Alarms

It all works fine for setting the bit on an incoming alarm, but when it comes to resetting the bit, I have an issue

For the resetting of the bit:

alarm state = "incoming & acknowledged" will work and the bit is reset, alarm buzzer is silenced

alarm state = "incoming, outgoing & acknowledge" will not work and the bit stays true

alarm state = "incoming, acknowledge & outgoing" also will not work, the bit stays true

The weird thing is for alarm state = Normal, the bit will be reset when the alarm goes to outgoing, even though it has not been acknowledged, this bit resets after a 5 - 10 second delay.

The system consists of one MPT1500 and three  s71200G2 PLCs.

The panel switches a single bit on all 3 PLCs so that the alarm can be heard in all 3 locations. 

Kindest regards

Kyle

Hi,

I am not running a script, just using the check box/ menu system provided. Please see screen shot attached.

I tried each setting on its own (so not using a whole bunch of OR statements). Nothing changed, still does not reset the bit.

Cheers