Rating 
Thanks 1
5 Entries
| 6/23/2021 2:29 AM | |
|
Posts: 3 Rating:
|
Hi Marko, Could you please explain working principles of FB 216 Feedback block (S7 300) ?. how FB 216 is working, step by steps from ON request up to output Q= ON and when it is de-energised (operational sequence ) Thanks Regards Dish ------------------------------------------------------------------------------------------ |
Last edited by: dish at: 06/23/2021 02:31:41Last edited by: dish at: 06/23/2021 03:41:02Last edited by: Jen_Moderator at: 06/23/2021 08:34:10New subject after splitting |
|
| 6/23/2021 2:51 AM | |
Joined: 9/27/2006 Last visit: 1/12/2026 Posts: 12480 Rating:
|
Hello Dish; Have you looked a the Distributed Safety- Getting Started manual? https://support.industry.siemens.com/cs/ww/en/view/19810812 Step 13 in the application example shows how to setup the feedback loop in a safety program, using FB 216. Hope this helps, Daniel Chartier |
This contribution was helpful to
|
|
| 6/23/2021 3:01 AM | |
|
Posts: 3 Rating:
|
Hi Could you please explain working principles of FB 216 Feedback block (S7 300) ?. Thanks Regards Dish |
| 6/23/2021 9:56 AM | |
|
Posts: 5521 Rating:
|
hi dish, have a look to the help of the block: the feedback-block work the same way in each Safety-SW. regards, |
Follow us on