Hai Everyone,

I has customer replaced the motor with an identical part, however, the motor drawn current is high with the new motor. The old motor current was 9.0A and the new motor is around 12A. We are looking for support to check the drive setting and fine-tune it if required.

I need to change the old motor data with the new motor data at micromaster? 

Please refer below manuals.

MICROMASTER 420/430/440

Parameter List: MICROMASTER 440

Operating Instructions: MICROMASTER 440 0,12 kW - 250 kW

Getting Started MICROMASTER 440

Could it be possible that the motor is connected in delta rather than star?

Tractor