I can't find V1.2.1, where can I find it?

------------------------------------------------------------------------------------------
Split from Firmware Update to use Example Image as of V1.2.1 and Industrial OS as of V3.2.2.

 Hi loveflowersx, How to setup the IOT2050 v1 and it version upgrades with Example Image here

Regards

loveflowersx

I have an IoT 2050 basic FS:04, should I first install the firmware V1.1.1 and then V1.2.1? Finally, can I also install V1.3.1?

I can't find V1.2.1, where can I find it?

Thank you very much

Best regards

------------------------------------------------------------------------------------------
Split from Firmware Update to use Example Image as of V1.2.1 and Industrial OS as of V3.2.2.

Hi loveflowersx 🎉

For V1.1.1 do refer the setting mentioned in post here

For V1.3.1 check out node setting through guide post here

Thank you 

Regards.

loveflowersx

Hi Jack0004,

In the web only V1.1.1 and V1.3.1, which one can I install?

When I insert the image V1.1.1.1 I get errors... and red led. When I give to run_bootcmd_mmc0 nothing...

if I put V1.3.1 led stat green and all good. but still it's weird..what can I do?

Thank you!

Best regards