Dear experts,

I have downloaded a project, containing a IM151 device, in my safety S7-315F CPU (315-2FJ14-0AB0). After that, I´m experiencing some wierd situations, that is presented in the following lines.

While working on a project, the following error appeared to me when downloading to CPU (The safety attribute on the module cannot be overwritten by a configuration that does not have a safety attribute. The download will not be executed.).

Added to this error, my CPU have the SF Led showned, and the Module Information exhibits this message : Different order numbers detected. 

How can I fix this issue?

Regards!

Some additional info:

CPU: Simatic S7-300 (315-2FJ14-0AB0)

Project: IM151-8F PN/DP CPU

 Hello dchartier,

I fortunately got the download to work, going into CPU Properties in HW Config, and enabling the option "CPU contains safety program"...

The Safety Programming Software i´m using is Distributed Safety v5.4

dchartier

Hello fsgonzaga;

What Safety programming software are you using for this project?

Distributed Safety v5.4?

Could you show us some screenshots of the PLC Safety configuration?

Hope this helps,

Daniel Chartier