Skip to Content

support.automation.siemens.com | Technical Forum | Monday, September 1, 2025 9:36:41 PM

Print

Error No CEMAT PLC Found - License Problem?

Created by: Ram Kishore at: 6/8/2014 1:44 PM (10 Replies)

Rating (0)

Thanks 4

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

6/8/2014 1:44 PM	Rate (0)
Ram Kishore Posts: 8 Rating: (0)	Dear All, I am also facing the same problem. My SYSPLC chart name is SYSPLCGM4 (GM4 is the PLC name), all the required cemat blocks are avaialble in this chart. It is compiled to OS and downloaded. But still in Wincc, when i open Group face plate i get the same error message "No CEMAT PLC Found" My CEMAT version is 7.1 but in ALM the Cemat License Verion number is showing V6.1. Is this ok. All the licenses have been upgraded. Please help. Best Regards, Ram Kishore
Ram Kishore Posts: 8 Rating: (0)	Last edited by: Narrator1 at: 11.06.2014 10:33 Topic split from: /tf/WW/de/Posts/51201#top
Suggestion To thank Quote Answer

6/10/2014 8:49 AM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 8/13/2025 Posts: 228 Rating: (31)	Hi, maybe there got something wrong during license upgrade...? Check your licenses on your upgrade medium for the right version. For upgrading licenses see this post. Regards jumo
	Last edited by: jumo at: 6/10/2014 8:50 AM
Suggestion To thank Quote Answer

6/10/2014 11:07 AM	Rate (0)
Ram Kishore Posts: 8 Rating: (0)	Dear All, I am facing a poblem with CEMAT License on Server and Client. 1. When i open a Group faceplate in Wincc RunTime on Server, i get pop up message as below "PC Name: PCS7SERVER1 PC Type : Server Demo Mode : No No. Of PLC's : 0 No. Of License: 6 NO CEMAT PLC FOUND" 2. On Wincc Client Run time, when i open a Group faceplate i get below message "No Server License Found On SERVER" I am using PCS7 V7.1 SP4, WinCC V7.0,SP2,Upd8 and Cemat V7.1 3. The Cemat software i received from SIEMENS is CEMAT V7.1 SP1. When i check the license key for Cemat supplied by Siemens - in License Manager, i found the License version as 6.1. Is it normal because software version is 7.1 and license version is 6.1. Anyone please help me to solve the above issues. Best Regards, Ram Kishore Attachment CEMAT ERROR.JPG (389 Downloads)
Ram Kishore Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

6/11/2014 10:46 AM	Rate (0)
No Name Posts: 220 Rating: (11)	Hi, I think you could need a License Upgrade to 7.1. If you got the 6.1 License with CEMAT 7.1 from Siemens, I would contact your Siemens distribution partner or maybe a Support request.
No Name Posts: 220 Rating: (11)
Suggestion To thank Quote Answer

6/19/2014 10:37 AM	Rate (0)
Ram Kishore Posts: 8 Rating: (0)	Dear friend, We could solve the "No Cemat PLC Found" pop up issue. Actually in PCS7 V6.1 we had 4 plcs GM3,GM4,MIXER and PLC1. So our Sysplc chart names were SYSPLCGM3, SYSPLCGM4,SYSPLCMIXER & SYSPLCPLC1. And we had no cemat issues. But after migration to PCS7 V7.1 we had cemat popup error. So just as a trial and error, we modified our SYSPLC chart names as SYSPLC01, 02, 03 & 04. Compiled & downloaded to OS. When i opened Group faceplate there was no cemat pop up error. The Cemat license has no issue. Eventhough Cemat software is V7.1 SP1, license version is still maintained V6.1. It has been confirmed by Siemens. Now one issue we still have is on clien machine. When i open Group faceplate on client i get pup up error "No Server License found on Server". Thank you everyone for your feedbacks. Also if someone has some suggestions for the license error on client. please help us. Best Regards, Ram Kishore
Ram Kishore Posts: 8 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users __Michal__

6/30/2014 5:07 PM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 8/13/2025 Posts: 228 Rating: (31)	Hi Ram Kishore, thank you for your solution with the chart names for SYSPLCxx. Have youfound a solution for your second issue by now? Regards jumo

Suggestion To thank Quote Answer

6/30/2014 9:30 PM	Rate (0)
Ram Kishore Posts: 8 Rating: (0)	Dear Friend, I have resolved the second issue also. I reconfigured the client machine by replacing all the cemat related files in the client project from the cemat_cs folder. Did a complete download from the ES after deleting the project on client. Started wincc runtime and opened the group faceplate and found working fine. Best Regards, Ram Kishore
Ram Kishore Posts: 8 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users S_Moderator jumo

3/12/2015 12:27 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4760 Rating: (122)	New question published by Ram_BahrainSteel is split to a separate thread with the subject After upgrade from PCS7 V7.1 to V8.0 SP1 Upd1 ERROR 'No Cemat PLC Found' appeared. Best regards Min_Moderator

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Moehrjoo

3/15/2015 8:35 AM	Rate (0)
Bishoyzareef Posts: 1 Rating: (0)	I also have same problem when i open any group a pop-up message appear [ NO SERVER LICENSE FOUND] PC- Name : SRV1 PC- Type: Server No. of PLC: 7 No. of License : 0 NO SERVER LICENSE FOUND No CEMAT authorization found Please Help Attachment License 22.jpg (821 Downloads)
Bishoyzareef Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/27/2015 12:26 AM	Rate (0)
AutoGen_416501 Posts: 4 Rating: (0)	Ram Kishore Dear All, I am also facing the same problem. My SYSPLC chart name is SYSPLCGM4 (GM4 is the PLC name), all the required cemat blocks are avaialble in this chart. It is compiled to OS and downloaded. But still in Wincc, when i open Group face plate i get the same error message "No CEMAT PLC Found" My CEMAT version is 7.1 but in ALM the Cemat License Verion number is showing V6.1. Is this ok. All the licenses have been upgraded. Please help. Best Regards, Ram Kishore HOW DID YOU FIX THIS ISSUE? CAN YOU TELL ME ?
AutoGen_416501 Posts: 4 Rating: (0)	Last edited by: Min_Moderator at: 5/27/2015 3:34:25 PM Contact data deleted
Suggestion To thank Quote Answer