Greetings,

I have a problem with structure tags addressing, my questions are

1) How can I put a specific address in my structure tags?

For example my CB01 (datatype = str_klappe_1a_2e_2st), in my TIA program I have 16 bit ADDRESS FOR 1 data type - DB29.DBX4.0 until DB29.DBX5.7.

2) So in my structure tags address, can I put DB29,DBB4 or I should put DB29,DBW4?

bg2492

Hello 2eratul,

a structure is a complex datatype, consisting of some elements
(members) of simple datatypes.
If you then create a tag with this structure, you define only
the start-address of this structure-tag.
The addresses for the members are generated automatically.
For more detailed innformation see the help of WinCC,

Regards

Georg Berghof
 

Hi Georg,

I'm sorry to let you know that I can't connect my array address in TIA to my WINCC V7.4 structure address. I have 16 bit array value in my TIA as you can see in the picture, so my address in wincc should be DBW right?

For example:

In TIA DB29.DBX4.0...DB29.DBX5.7 . In my wincc I should put DB29,DBW4?

It seems like I have to put every address one by one manually. Please help