How to bring camera picture from Keyance via VGA cable to comfort panel ?
Created by: vorapob at: 9/23/2021 1:35 PM (4 Replies)
Rating 
Thanks 1
5 Entries
| 9/23/2021 2:57 PM | |
Joined: 10/10/2014 Last visit: 12/8/2025 Posts: 1725 Rating:
|
Hi vorapob, You can use only IP-cameras to show any picture on your comfort panel. Monitoring Machines and Plants with Network Cameras and SIMATIC HMI Comfort Panels https://support.industry.siemens.com/cs/ww/en/view/62383298 Best regards schufri |
| 9/23/2021 4:35 PM | |
Joined: 1/17/2013 Last visit: 1/13/2026 Posts: 1117 Rating:
|
Dear schufri, How to download CamControlES file from Siemens site ? |
|
Best Regards, |
|
| 9/23/2021 4:48 PM | |
Joined: 12/18/2014 Last visit: 1/18/2026 Posts: 36482 Rating:
|
Why do you post twice for the problem? You made also here a topic: How to bring camera picture from Keyance via camera web browser to comfort panel ? |
This contribution was helpful to
|
|
| 9/24/2021 6:58 AM | |
|
Posts: 8171 Rating:
|
Closed cause question posted twice. The second thread with the subject How to bring camera picture from Keyance via camera web browser to comfort panel ? is published within the conference SIMATIC WinCC (TIA Portal). Jen_Moderator |
Follow us on