Hi,

I have also faced with this problem.

Thank you,

------------------------------------------------------------------------------------------
Split from error 6407 Channel %1 tool %2 cannot be placed in magazine %3 on location %4.

Hi,

I have also faced with this problem. Can you upload the video again?

Thank you,

corasalin

SOLVED !!! It was easier than it seemed, the tools involved in tool change fail were stuck virtualy in arm, and this is not visible by default. I atached a photo and a video how i fixed this. You can put this also to eror 6407 solution along with the other 2 solutions from there.  Thank you for all the suport !

Video here :    https://streamable.com/aqcxj3

Hi Nulizhang,

Thank you for your interest in this topic.

Machine system: Siemens 840D

Machine type: CNC

Machine builder: DMG Mori

Machine model: Sauer

You can see the problem from attached picture.

nulizhang

 Hi, iiikkk, I tried, the link of video is not working. and i don't think the original user of this topic would  come back. so please post your own question using a new tile marching yourself problem.

give the detail the machine system --Siemens control type and machine builder name, post one picture of which can let other understand your problem. 

off cause you can use information in this discussion to try to do it yourself or contact OEM   

iiikkk

Hi,

I have also faced with this problem. Can you upload the video again?

Thank you,

 

corasalin

SOLVED !!! It was easier than it seemed, the tools involved in tool change fail were stuck virtualy in arm, and this is not visible by default. I atached a photo and a video how i fixed this. You can put this also to eror 6407 solution along with the other 2 solutions from there.  Thank you for all the suport !

Video here :    https://streamable.com/aqcxj3